How do I start my pool pump for the first time

For all the pool knowledge you're looking for, check out ask the pool guy hq.Once the pump basket is filled and tightened, make sure the air release valve is open and turn the power to the pump on.Hear from one of our pool experts with tips on how to prime your pump when opening your above ground swimming pool.Before first filling a pool or adding substantial amounts of fresh water to the pool, either test the water using a.There are shut off valves that are closed.

Fill it slowly so you can make sure the water is seeping into the pump lines.Before you flip the switch, you'll want to remove the ice compensators from the skimmer put your.On the other hand, add the ph decreaser if the ph level is high.If the ph is high, based on the test strip, add ph decreaser (minus).Remove drain plugs or winterizing plugs from the surface skimmers and wall returns, and restore directional fittings.

Rotate the valve to rinse.Our pump strainer housing is the section of the pump that houses a basket with a clear lid.Turn off the pump, rotate the valve to filter position and begin to filter.Follow these steps to insure your pool will be clean and clear.Remove the pump lid and clear all of the debris from the basket.

Look not only for valves in front of the pump, but also possibly on the return line.Please refer to the bottle's instructions for the proper amount to add for the adjustments.Most pool pumps will prime using this method.Start at roughly half or 50% the highest chlorine products and wait 24 hours.